29 June 2017

Winner Announcement: Challenge #265: Windsurfing Board & Sail

The winner of previous Challenge #265: Windsurfing Board & Sail is...

Moana Windsurfing board by EMAAN. Congratulations on your win! Your winner certificate is available in the Challenge Winners section and your model is now featured on the SketchUp 3D Challenge Facebook page!

Current Challenge: #266 Tea Set: 19 June 2017 - 2 July 2017
3D Warehouse Tag: 3D Challenge 266

19 June 2017

SketchUp 3D Challenge #266: Tea Set

Challenge Period: Monday, 19 June 2017 - Sunday, 2 July 2017


The history of tea sets date back to the Chinese Han Dynasty and have been a part of many cultures around the world. The teaware design and style varies upon the culture in which they are used and ornamentation may vary based on the setting in which they are used.

For the purposes of this challenge, you may model a tea set from any period or culture you choose or create a completely new design from your imagination. Your set should include, at a minimum, a serving vessel (a kettle) for the tea, two tea cups, and a serving tray.

3D Warehouse Tag: 3D Challenge 266

Standard Participation Rules apply, see the Participation Manual for more information. Thanks to Payal Sinha for the challenge suggestion.

Reminder: Participants in challenges (those whom submit models) are required to vote when the challenge is over. This is to encourage the community aspect of the challenge by giving the other participants feedback on their work. If you don't submit a vote, your entry will be disqualified. The only exception is when just one entry is submitted to the challenge.

18 June 2017

Vote Now: SketchUp 3D Challenge #265: Windsurfing Board & Sail

Voting Closes: Thursday, 29 June 2017 @ 5:00PM PDT

Challenge #265: Windsurfing Board & Sail has come to a close. Thanks for the awesome entries! Let's start the voting!

To vote, first review the entries, then create a comment on this post using the following example:

3 points: first place model name by modeler name
2 points: second place model name by modeler name
1 points: third place model name by modeler name

Participants in the challenge will receive a bonus point for their entry if they also make a suggestion for a future challenge when they vote.
If you submit an entry, you must also vote:
   - You may not vote for your own entry.
   - Please indicate the username you use in the 3D Warehouse if it differs from the one you use to submit your vote.

You may also make a comment, if you wish, on why you chose each model. Please also take a moment to suggest a future topic for the challenge.

Good luck!

15 June 2017

Winner Announcement: Challenge #264: Garden/Tool Shed

It's a 3-way tie! The winners of previous Challenge #264: Garden/Tool Shed are...


Garden Shed by Payal Sinha, Tool Shed by alfrebilbao, and Garden Shed by samothrace41. Congratulations on all your wins! Your winner certificate is available in the Challenge Winners section and your model is now featured on the SketchUp 3D Challenge Facebook page!

Current Challenge: #265 Windsurfing Board & Sail: 5 June 2017 - 18 June 2017
3D Warehouse Tag: 3D Challenge 265

05 June 2017

SketchUp 3D Challenge #265: Windsurfing Board & Sail

Challenge Period: Monday, 5 June 2017 - Sunday, 18 June 2017

Windsurfing

From Wikipedia, the free encyclopedia 
Windsurfing is a surface water sport that combines elements of surfing and sailing. It consists of a board usually 2.5 to 3 meters long, with displacements typically between 60 and 250 litres, powered by wind on a sail. The rig is connected to the board by a free-rotating universal joint and consists of a mast, boom and sail. The sail area generally ranges from 2.5 m² to 12 m² depending on the conditions, the skill of the sailor, the type of windsurfing being undertaken and the weight of the person windsurfing.
For the purposes of this challenge, you are to model a complete windsurfing board and sail of any class and the display it is a pleasing manner. Surf's up!

3D Warehouse Tag: 3D Challenge 265

Standard Participation Rules apply, see the Participation Manual for more information. Thanks to samothrace41 for the challenge suggestion.

Reminder: Participants in challenges (those whom submit models) are required to vote when the challenge is over. This is to encourage the community aspect of the challenge by giving the other participants feedback on their work. If you don't submit a vote, your entry will be disqualified. The only exception is when just one entry is submitted to the challenge.

04 June 2017

Vote Now: SketchUp 3D Challenge #264: Garden/Tool Shed

Voting Closes: Thursday, 15 June 2017 @ 5:00PM PDT

Challenge #264: Garden/Tool Shed has come to a close. Thanks for the awesome entries! Let's start the voting!

To vote, first review the entries, then create a comment on this post using the following example:

3 points: first place model name by modeler name
2 points: second place model name by modeler name
1 points: third place model name by modeler name

Participants in the challenge will receive a bonus point for their entry if they also make a suggestion for a future challenge when they vote.
If you submit an entry, you must also vote:
   - You may not vote for your own entry.
   - Please indicate the username you use in the 3D Warehouse if it differs from the one you use to submit your vote.

You may also make a comment, if you wish, on why you chose each model. Please also take a moment to suggest a future topic for the challenge.

Good luck!

01 June 2017

Winner Announcement: Challenge #263: Armchairs

The winner of previous Challenge #263: Armchairs is...

Armchair nÂș1 1 by alfrebilbao. Congratulations on your win! Your winner certificate is available in the Challenge Winners section and your model is now featured on the SketchUp 3D Challenge Facebook page!

Current Challenge: #264 Garden/Tool Shed: 22 May 2017 - 4 June 2017
3D Warehouse Tag: 3D Challenge 264